Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Service warning light

To reset the Service light on a Ford Fiesta, insert the key and turn it to switch on the dashboard; then, press both the brake pedal and the accelerator pedal simultaneously. Wait for about thirty seconds, noting that the oil icon will start to flash until it turns off. At this point, you can switch off the dashboard and release the brake and accelerator pedals. Once the dashboard is turned on again, you will notice that the Service light is off, indicating that the reset was successful.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Fiesta?
How to Reset the Service Light on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To reset the Service light on a Ford Fiesta, press the brake and accelerator pedals simultaneously. While holding the pedals down, turn on the igniti…
How do you reset the Service light on the Ford Fiesta?
How do you reset the Service light on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) On the instrument panel of the Ford Fiesta, it will be possible to make the Service light disappear by simultaneously pressing the brake and accelera…
How to Reset the Service Light on a Ford Fiesta?
How to Reset the Service Light on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The service light on a Ford Fiesta can be reset from the instrument cluster by pressing the brake and accelerator pedals simultaneously. While holdin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos