Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Lock on a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Trunk lock

In this video tutorial, you will see how to remove and replace the lock or closure of the boot on the second generation Ford Focus, following these simple steps. First, open the tailgate and start by removing the inner plastic panel, unscrewing the screws with a Torx T20; then remove the lock module by unscrewing the additional screws and disconnecting the cable, as illustrated in the video. At this point, you can replace it with a new one of the correct type; then reassemble everything, applying the reverse procedure of disassembly!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Bay Lock on a Ford Focus Mk2
Ford Focus (2004-2011 / MK 2, Focus 2) This guide shows how to replace the engine bay lock on a Ford Focus Mk2. The first step is to remove the two 10 mm bolts that hold the lock lever in …
Removing Lock Cylinder from Ford Focus
Removing Lock Cylinder from Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, you will learn how to remove the lock cylinder from the door of a third-generation Ford Focus. First, open the door and remov…
How to Replace the Boot Lock of the Ford Focus
How to Replace the Boot Lock of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's step-by-step instructions will show you how to remove and replace the lock of the rear tailgate of the Ford Focus. First, open the boot and b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos