Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to remove the door panels of the 2007 Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Door panel
Operation: How to remove the door panels of the 2007 Ford Focus

The guide shows you how to remove the inner panel of the car door. The first operation to perform is, using the plastic lifters, to remove the plastic part under the arm holder, starting from the edge near the lock and proceeding towards the front of the vehicle. Now, with a hex wrench, unscrew the two bolts at the ends of the hand compartment. Then remove the handle lever cover. Then disconnect the connectors of the mirrors, the window lifter and the speaker near the side rearview mirror. Now, on the bottom of the door panel, detach the fixing pins with the plastic lifter. With a little force, detach the panel on the remaining corners. The operation is now complete.


Posted on 11 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos