Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Ford Fiesta?

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Starter motor

See other generations:
Video tutorial

To replace the starter motor on a Ford Fiesta, raise the car using a ramp or jack to access its underside. The starter motor is located near the engine bay, roughly in the centre.

To remove it, disconnect the connectors attached to it and loosen the bolts securing it in place. Once the starter motor is freed, you can extract it from its housing and replace it with a new part.

The new starter motor must then be connected to the connectors and secured with the appropriate bolts.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor from a Ford Fiesta
How to Remove the Starter Motor from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To remove the starter motor from the Ford Fiesta, open the bonnet and disconnect the negative terminal of the battery. Locate the starter motor, posi…
How to Remove the Starter Motor on the Ford Fiesta 1.4 MK6
How to Remove the Starter Motor on the Ford Fiesta 1.4 MK6
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In today's video, learn how to remove and replace the starter motor on the sixth generation Ford Fiesta with a 1.4 Zetec engine. First, open the bonn…
Replace the Starter Motor on a Ford Fiesta 1.4 tdCi
Replace the Starter Motor on a Ford Fiesta 1.4 tdCi
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video, see how to remove and replace the starter motor on a Ford Fiesta mk6 by following these steps: If your car does not start when you tur…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos