Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Starter Motor on a Ford Fiesta 1.4 tdCi

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Starter motor

In this video, see how to remove and replace the starter motor on a Ford Fiesta mk6 by following these steps: If your car does not start when you turn the key, there may be a problem with the starter motor; therefore, purchase a new starter motor for your vehicle, getting advice from an authorised workshop. First, open the bonnet, disconnect the battery, and also disconnect the intake hose. Use a jack to lift the front of the car (see video). Once you locate the starter motor, undo the bolts using a 10 and 13 mm spanner. Proceed to replace the old non-functioning starter with the new one.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor on the Ford Fiesta 1.4 MK6
How to Remove the Starter Motor on the Ford Fiesta 1.4 MK6
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today's video, learn how to remove and replace the starter motor on the sixth generation Ford Fiesta with a 1.4 Zetec engine. First, open the bonn…
Replacing the Timing Belt on the Ford Fiesta 1.5 TDCi
Replacing the Timing Belt on the Ford Fiesta 1.5 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, we will go through the procedure to remove and replace the timing belt on the Ford Fiesta 1.5 TDCi, following the instructions below. First, o…
How to Remove Injectors on Ford Fiesta MK6 1.6 TDCI
How to Remove Injectors on Ford Fiesta MK6 1.6 TDCI
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will learn how to remove and replace the diesel injectors on the sixth series Ford Fiesta with a 1.6 TDCI engine. First, …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos