Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor on the Ford Fiesta 1.4 MK6

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Starter motor

In today's video, learn how to remove and replace the starter motor on the sixth generation Ford Fiesta with a 1.4 Zetec engine. First, open the bonnet of your car and disconnect the battery; then lift the vehicle and locate the starter motor near the gearbox, as shown in the video. Next, disconnect the electrical wiring from the starter and unscrew the bolts to remove it and replace it with the new one; then reassemble everything by applying the reverse procedure of disassembly!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor on a Ford Fiesta
How to Remove the Starter Motor on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove and replace the starter motor on a Ford Fiesta? First, use a socket spanner to disconnect the battery power cables; remove the soundpro…
Replace the Starter Motor on a Ford Fiesta 1.4 tdCi
Replace the Starter Motor on a Ford Fiesta 1.4 tdCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, see how to remove and replace the starter motor on a Ford Fiesta mk6 by following these steps: If your car does not start when you tur…
How to Replace the Starter Motor on the Ford Fiesta?
How to Replace the Starter Motor on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the starter motor on the Ford Fiesta, open the bonnet to access the components located within the engine bay: the starter motor will be on…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos