Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Thermostat on the Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Thermostat

This guide provides step-by-step instructions for removing and replacing the thermostat and its housing on the sixth series Ford Fiesta. First, open the bonnet and start by removing the alternator, unscrewing the bolts with a socket spanner; then disconnect the drive belt. At this point, remove the coolant hose and use an 8 mm socket to unscrew the thermostat bolts; simply remove it and replace it with the new one, applying the reverse procedure for reassembly!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide will show you how to remove and replace the coolant thermostat on the Ford Fiesta 1.5. First, open the bonnet and begin by removing the al…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, open the front bonnet of your Ford Fiesta. Begin by draining the cooling system by undoing the relevant drain screw. Next, remove th…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the thermostat on the Ford Fiesta, you need to access the underside of the car to reach the pulleys around which the alternator belt is ar…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos