|
Do it yourself
| |||
| ||||
How to replace the alternator's elastic belt on a Fiesta 1.25
Model: Ford Fiesta
Fiesta 6, MK 6, MK VI
- Years 2008-2017
In this video we can see how to change the alternator elastic belt on a Ford Fiesta with a 1.25 engine. We remove the bolts from the alternator: this removes most of the tension, and helps a lot when we put the elastic belt back on. Now we remove the belt from the water pump, and slide it off. We remove the two 20 torx screws underneath. To mount the new belt on the pulleys, a specific tool is needed, or we can loosen another bolt located under the alternator, so that, moving it back and forth, it is not necessary to use a specific tool, but only a wrench and a ratchet. Once the belt is reassembled, we tighten the tension pulley clockwise. We may need to pull the belt under the water pump and move it back and forth until it fits correctly. Using a pry bar, we push the alternator inwards, and align the bolts from all sides, without tightening them too much, then we do a few test runs.
Posted on 25 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
This short guide will provide instructions for removing and replacing the alternator on the Ford Fiesta. First, open the engine bonnet and start by d…
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
Replacing the thermostat on a Ford Fiesta? Let's see how to remove it from the engine bay. Open the front bonnet, locate the part to be removed. To r…
Ford Fiesta
(2002-2008 /
Fiesta 5, MK 5, MK V)
To replace the alternator on a Ford Fiesta, open the bonnet to access the components in the engine bay. First, disconnect the car battery by removing…
Other guides you may be interested in
|
How to replace the horn on a Renault Duster - Dacia Duster
Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.136
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |