Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Bulb on a 2006 Ford Fiesta

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Light bulb

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the bulb on a Ford Fiesta by following a few simple steps that will help you work better on your car. First, get inside and secure the car with the handbrake engaged, then turn off the engine before proceeding.

Always remember not to touch the bulbs with your fingers before inserting them; if you have already done so, clean them with a bit of paper.

Open the bonnet and secure it with the appropriate prop. Remove the grille by lifting the tabs located at its end. Using a 27 Torx bit, unscrew the three screws holding the headlamp.

To remove the headlamp, pull it towards you and then disconnect the electrical connector. Remove the cover to replace the bulbs.

To replace the H4 bulb for both the main and dipped beams, disconnect the connector and lift the retaining tab of the bulb. Remove the bulb and replace it with a functioning one. Once the bulb is replaced, reassemble all the parts you removed in reverse order.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this tutorial, learn how to remove and replace the front headlight bulb on a second-generation Ford Fiesta. First, open the bonnet and start unscr…
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video tutorial, you will see how to replace the headlamp bulb on a Ford Fiesta by following a few simple steps that will allow you to work in…
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Briefly, we will see the instructions on how to remove and replace the front headlight bulb on the Ford Fiesta. First, open the bonnet of the vehicle…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos