Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Fuel Injection Pump on a Ford Focus 2.0 Ecoblue

Model: Ford Focus MK 3 - Years 2011-2018
Part: Pump

In today's tutorial video, you will see the instructions on how to remove the high-pressure fuel injection pump from a Ford Focus ST 2.0 Ecoblue. First, open and lift the bonnet, removing the plastic engine cover; then remove the intake hose and disconnect the air mass sensor connector. At this point, disconnect the high-pressure pump pipe by removing the appropriate clips; use a 17 mm spanner to undo the pipe nut and disconnect the electrical connector of the pump: remove the pump by undoing the fixing bolts with 8 mm and 10 mm spanners.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the High-Pressure Diesel Pump on the Ford Focus 2.0 TDCI
How to Remove the High-Pressure Diesel Pump on the Ford Focus 2.0 TDCI
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, follow the main instructions to remove and replace the high-pressure diesel pump on the second series Ford Focus with a 2.0 T…
How to Understand the Fuse Diagrams in a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The first fuse box in a Ford Focus can be found inside the vehicle's cabin and contains fuses assigned to: headlights, dipped beams, cigarette lighte…
How to remove the fuel pump from the Ford Focus
How to remove the fuel pump from the Ford Focus
Ford Focus (1998-2004 / MK 1) Today's instructions will illustrate the main steps on how to remove and replace the fuel pump from the Ford Focus. To access the fuel pump, it will …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos