Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Ford Explorer?

Model: Ford Explorer MK 2, Un105, Un150 - Years 1995-2001
Part: Door trim panel

To remove the door panel on a Ford Explorer, detach the plastic cover located in the handle recess by loosening the two screws underneath. Additionally, remove the button located at the top right of the panel by disconnecting its connector. At this point, detach the panel from the bottom and disconnect the connectors attached inside the piece. Once the connectors are disconnected, you can fully remove the panel and replace it with a new part.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of the Ford Explorer
How to Remove the Rear Door Panel of the Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) This brief guide outlines the procedure for removing the rear door panel of the Ford Explorer. First, open the rear door and start by unfastening and…
How to Replace the Door Lock on a Ford Explorer?
How to Replace the Door Lock on a Ford Explorer?
Ford Explorer (1991-1994 / MK 1, Un46) To replace the door actuator on a Ford Explorer, loosen the screws securing the door panel: these are located at the internal handle and near the rea…
How to Replace the External Door Handle on a Ford Explorer
How to Replace the External Door Handle on a Ford Explorer
Ford Explorer (2006-2010 / U251, MK 4) To replace the external door handle on a Ford Explorer, first remove the door panel. This can be done by loosening the screws located under the armre…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos