Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fog Light from a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Fog lights

Before you begin, exit the cabin and head to the front of your Ford Kuga. Using a small flathead screwdriver as a lever, start by prising off and removing the plastic trim of the fog light. This will expose the mounting bolts of the fog light, which you will need to unscrew and remove using a 7 mm spanner. Once you have removed the two mounting bolts, pull the fog light out of the bumper just enough to disconnect the rear connector. After completing this step, you can remove the fog light, and the disassembly will be finished.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to activate the fog lights in the Ford Kuga?
How to activate the fog lights in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) In this tutorial, we can see how to activate the fog lights in the Ford Kuga, a very simple and quick operation. These lights should obviously only b…
Where Are the Fuses Located in the Ford Kuga?
Where Are the Fuses Located in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) The fuses in the Ford Kuga are divided between two fuse boxes located within the vehicle: the first is found in the engine bay, protected by a specif…
How do you change the bulb of the fog lights in the Ford Kuga?
How do you change the bulb of the fog lights in the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) An enormous importance is given by the fog lights, which help us a lot during driving when the road has very low visibility due to fog. In case repla…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos