Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Pollen Filter on a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

Access the front passenger seat footwell, working in a rather awkward position. Unclip the lower clips of the glove compartment as shown in the video and remove it. Unscrew the screws underneath the removed drawer, then unscrew the screw that secures the lower and side cover of the centre tunnel.

Remove this cover and unscrew the bolt that secures the cabin air filter cover, or pollen filter. Pull it out by hand and insert the new filter.

Reassemble everything you removed in reverse order, and you're done.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on a Ford Ecosport?
How to Replace the Pollen Filter on a Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) The pollen filter on the Ford Ecosport is located inside the cabin, at the bottom of the dashboard, near the passenger footwell mat. To access it, yo…
Replacing the Cabin Air Filter in the Ford Ecosport
Replacing the Cabin Air Filter in the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) To replace the cabin air filter in the Ford Ecosport, first locate its position. In this case, as shown in the images, it is situated on the passenge…
How to replace the air filter in a Ford Ecosport
How to replace the air filter in a Ford Ecosport
Ford Ecosport (2003-2012 / Bv226) Replacing the engine air filter in your first-generation Ford Ecosport takes just a few minutes. With the steps outlined in this guide, you can compl…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos