Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Battery of the Ford Ecosport Remote

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Key

In this video tutorial, you will see how to disassemble and replace the battery of the key remote for the first series Ford Ecosport by following these simple steps. First, take your remote in hand and start by removing the physical key from inside it; then lever the slot of the rear cover to remove it, thus accessing the battery compartment, as illustrated in the video. Now replace the battery with a new one of the correct type (in this case, a CR 2450 3V); insert it the right way round and reattach the rear cover.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Ecosport (2012-2023 / BK, MK 1) Briefly follow the instructions to disassemble and replace the battery of the key fob for the Ford Ecosport. First, take the key fob and remove the p…
Ford Ecosport (2003-2012 / Bv226) To change the battery in the remote control of a Ford Ecosport MK1, take the remote control and pry it open with a small screwdriver until the two ha…
Ford Ecosport (2012-2023 / BK, MK 1) Today, see how to disassemble and replace the battery of the key fob for a Ford Ecosport by following these simple steps. First, take the key fob in …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos