Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Nozzles on the Ford F-350

Model: Ford F-350 P356 - Years: 2008, 2009, 2010
Part: Windshield washer nozzle

See other generations:
Video tutorial

Today, you will learn in this video tutorial how to remove and replace the windshield washer nozzles on the Ford F-350 by following these simple steps. First, open the hood and disconnect the washer fluid hose connected to the washer nozzle, allowing any fluid in the hose to drain out. Next, use needle-nose pliers to pull and remove the washer nozzle as shown in the video.

At this point, replace the old washer nozzle with the new one, using the original part; insert it until it fits perfectly onto the hood!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Replace the Windshield Wipers on a Ford F-350?
How to Replace the Windshield Wipers on a Ford F-350?
Ford F-350 (2017-2023 / P558) To replace the windshield wipers on a Ford F-350, lift the wiper arm so that it is not in direct contact with the windshield. At this point, position…
How to Replace the Outside Rearview Mirror on the Ford F-350?
How to Replace the Outside Rearview Mirror on the Ford F-350?
Ford F-350 (1999-2007 / Phn131) To replace the rearview mirror on the Ford F-350, you need to detach the triangular plastic cover located at the mirror on the inside of the door. On…
How to Replace the Front Shock Absorber on a Ford F-350
How to Replace the Front Shock Absorber on a Ford F-350
Ford F-350 (2008-2010 / P356) To replace the front shock absorber on a Ford F-350, lift the vehicle with a jack so that the corresponding wheel is off the ground. Next, loosen all…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos