Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs on the Ford F-250

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Tail light bulb

Follow this brief guide to remove and replace the rear headlight bulbs on the Ford F-250. First, open the tailgate and start by removing the two mounting screws located at the back of the headlight using a socket wrench; then disconnect the electrical connector for the bulbs to remove the assembly, as shown in the video. At this point, replace the bulbs with new ones that have the same base; insert them correctly into the socket and then reassemble the headlight, securing it properly with the screws!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs on a Ford F-250?
How to Replace the Rear Headlight Bulbs on a Ford F-250?
Ford F-250 (2011-2016 / P473) In this tutorial, you will see how to remove the rear headlight from the Ford F-250 pickup and replace the bulbs. For this simple and quick operation…
How to Replace the Rear Headlight Bulbs in a Ford F-250 Pickup
How to Replace the Rear Headlight Bulbs in a Ford F-250 Pickup
Ford F-250 (2011-2016 / P473) Replacing the rear headlight bulbs in a Ford F-250 pickup is very simple. Let's see how to proceed in this tutorial. For this operation, in addition …
How to Replace the Rear Tail Light Bulb on a Ford F-250
How to Replace the Rear Tail Light Bulb on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the rear tail light bulb on a Ford F-250, lower the tailgate of the truck. This will allow you to loosen the bolt located between the tail…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos