Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs in a Ford F-250 Pickup

Model: Ford F-250 P473 - Years 2011-2016
Part: Tail light bulb

Replacing the rear headlight bulbs in a Ford F-250 pickup is very simple. Let's see how to proceed in this tutorial. For this operation, in addition to the correct replacement bulbs, you need an 8mm socket wrench and a flathead screwdriver. Start by opening the tailgate, then remove the two mounting bolts of the headlight. Next, grasp the headlight and pull it out from the body. To replace a bulb, simply disconnect the connector and turn the bulb socket counterclockwise. Finally, reassemble everything by following the reverse procedure.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs on a Ford F-250?
How to Replace the Rear Headlight Bulbs on a Ford F-250?
Ford F-250 (2011-2016 / P473) .. how to remove the rear headlight from the Ford F-250 pickup and replace the bulbs. For this simple and quick operation, you will need a 8mm socket wrench.. …
How to Replace the Headlight Bulbs in a Ford F-250 Pickup?
How to Replace the Headlight Bulbs in a Ford F-250 Pickup?
Ford F-250 (2017-2022 / P558) .. how to replace the headlight bulbs in a Ford F-250 pickup, a very simple and quick operation. For the passenger side, the available space in the engine.. …
How to Replace the Rear Headlight Bulbs on the Ford F-250
How to Replace the Rear Headlight Bulbs on the Ford F-250
Ford F-250 (1999-2007 / Phn131) Follow this brief guide to remove and replace the rear headlight bulbs on the Ford F-250. First, open the tailgate and start by removing the two moun…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos