Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Injector Replacement Instructions

Model: Ford Transit MK 7 - Years 2006-2014
Part: Fuel injectors

In case of engine failure to start and excessive smoke, one possible cause could be a malfunction of one or more injectors; if a nozzle or a shutter is damaged, the injector will tend to pass too much diesel and not provide the correct injection pressure, compromising the quality of combustion. The video highlights the excessive flow from the injector of the first and fourth cylinder. Consequently, the engine management ECU will also log errors related to the injector failure. If the vehicle has already covered many miles, it is advisable to replace all the injectors, not just the faulty ones; at the end of the installation, coding will be necessary by entering, via diagnostic tool, the 16-digit code found on each injector: make a note of it before installation.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing Injectors from the Ford Transit
Guide to Removing Injectors from the Ford Transit
Ford Transit (2000-2006 / MK 6) This guide provides the main instructions on how to remove and replace the fuel injectors of the Ford Transit. First, open the bonnet of your car and…
How to Remove the Injectors from a Ford Transit?
How to Remove the Injectors from a Ford Transit?
Ford Transit (2000-2006 / MK 6) To remove the injectors from a Ford Transit, open the bonnet to access the engine bay: the injectors will be located at the top of the engine, just b…
Injector Removal Tutorial on Ford Transit
Injector Removal Tutorial on Ford Transit
Ford Transit (2014-2024 / MK 8) Let’s look at removing the injectors on the Ford Transit. Pull the lever to open the engine bay and lift the front bonnet, securing it. Remove the en…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos