Do it yourself
| ||||
|
Ford Fiesta - Video tutorial
Model: Ford Fiesta
MK VI, Fiesta 6, MK 6
- Years 2008-2017 Using the appropriate key, turn on the instrument panel of your Ford Fiesta. Once the various lights have gone out but the oil change lights remain on, press and hold the brake and accelerator pedals together for twenty-five seconds. After doing this, release the pedals and turn off the ignition. Wait two minutes before turning it back on and checking that the light has disappeared. Remember that this procedure must be carried out only after having actually carried out routine maintenance and not before this, in order to avoid problems with the engine and the vehicle in general. Good job!
Posted on 28 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |