Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering rack of the Ford Fiesta

Model: Ford Fiesta MK V, Fiesta 5, MK 5 - Years 2002-2008

Today we will discover the guide on how to disassemble and replace the Ford Fiesta steering rack, following the instructions below. First we lift the car and start by unscrewing the screws of the steering rack, removing the metal bulkhead and removing the supports; after which we disconnect the swinging arms to disassemble the entire steering mechanism, as shown in the video. Now we carry out the revision of the entire rack or directly the replacement; then we assemble everything, following the video tutorial until the end for reassembly!

Posted on 9 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the steering box of the Ford Fiesta
How to disassemble the steering box of the Ford Fiesta
Ford Fiesta (2008-2017 / MK 6, MK VI, Fiesta 6) Let's find out in this guide the main instructions that will allow us to disassemble and replace the steering box of the Ford Fiesta. First of all, w…
How to remove and replace internal steering rods in a Ford Fiesta
How to remove and replace internal steering rods in a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) This video shows us how to remove and replace the internal steering rods in a Ford Fiesta 1.4i 16v. First of all, you need to remove the steering hea…
Ford Fiesta airbag removal
Ford Fiesta airbag removal
Ford Fiesta (2008-2017 / MK 6, MK VI, Fiesta 6) In today's video tutorial we will see how to remove the steering airbag of a Ford Fiesta. First we will first disconnect the battery poles, so as not…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos