Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Time on Ford B Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Clock

In this video, we will show you how to change the time on the Ford B Max. Turn on the onboard navigator, then use the central controls to select the 'menu' option. Once found, press the central button and select ok. At this point, using the arrows located around the central button, find the 'Clock Settings' option. Once found, press the ok button again and navigate to 'Daylight Saving Time'. Once you press the central button, the time will be automatically adjusted, and you will have the correct time. This is a very simple operation that takes no more than 30 seconds.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fan Resistor on a Ford B-Max
How to Replace the Fan Resistor on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, dis…
How to replace the rear headlight bulbs of the Ford B-Max
How to replace the rear headlight bulbs of the Ford B-Max
Ford B Max (2012-2018 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Ford B-Max. First of all, we …
Reset Oil Light on a Ford B Max
Reset Oil Light on a Ford B Max
Ford B Max (2012-2018 / MK 1) How to reset the oil light on a Ford B Max? Let’s look at the reset procedure. Enter the Ford vehicle and turn on the instrument panel, then locate t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos