Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the maintenance light on a Ford B-Max

Model: Ford B Max MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

Video tutorial

Let's see in a few simple steps how to reset the maintenance light for the engine oil change on a Ford B-Max. First, get in the vehicle and turn the ignition key to position one to switch on the instrument cluster; then press and hold the accelerator and brake pedals for about ten seconds until the engine oil change warning light resets completely, as shown in the video.

Now turn off the instrument cluster and finally start the engine to complete the reset operation!


Updated on 19 September 2026 by ScegliAuto


Related tutorials

Reset Oil Light on a Ford B Max
Reset Oil Light on a Ford B Max
Ford B Max (2012-2018 / MK 1) How to reset the oil light on a Ford B Max? Let’s look at the reset procedure. Enter the Ford vehicle and turn on the instrument panel, then locate t…
Resetting the Service Light on a Ford B-Max
Resetting the Service Light on a Ford B-Max
Ford B Max (2012-2018 / MK 1) To reset the service light on the Ford B-Max, first park your car on a flat area or place it on a ramp. This precaution is advisable whenever mainten…
How to Reset the Tyre Service Indicator on a Ford B-Max
How to Reset the Tyre Service Indicator on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Let’s see how to reset the tyre service indicator on a Ford B-Max. This is a very simple operation: enter the vehicle, turn on the ignition (you will…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos