Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Ford Fiesta mk6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light

To remove the rear light from your Ford Fiesta, access the boot from the rear hatch and remove the two visible screws on the inner shell. Next, gently detach the seal and move the side carpet covering the boot of your car. From the internal space behind the light, gently insert your hand to remove the last plastic clip holding the light from the central pin. Keep it safe and ensure you do not lose it. Then, disconnect the connector attached to the rear lamp. You can now remove the light, taking care not to damage either the light or the bodywork.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Reflector Lamp on the Ford Fiesta?
How to Remove the Rear Reflector Lamp on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial, you will see how to remove the small rear reflector lamp of the Ford Fiesta MK6. First, use a Torx key to remove the lower screw of…
How to Remove the Rear Light on a Ford Fiesta
How to Remove the Rear Light on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial, you will see how to remove the rear light on a Ford Fiesta, a very simple and quick operation. First, ensure the key is not in the …
Replacing Stop Light on Ford Fiesta
Replacing Stop Light on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How do you remove the rear light on your car? Let's look at removing the rear light on a Ford Fiesta. Lift the car's tailgate and secure it. Remove t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos