Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Gear Knob on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Shift knob

In this brief video tutorial, learn how to replace the gear knob on a Ford Focus mk2 with a manual gearbox, produced from 2004 to 2011. The operation is very simple and can be done alone in just a few minutes. To start, lift the base of the gear knob gaiter, then begin to unscrew the knob counter-clockwise. Once done, detach the old knob from the gaiter and replace it with a new one. Finally, reattach the new gear knob along with its gaiter, and you have completed the job.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) Replacing the damaged gear knob on a Ford Focus, here’s how to remove it. Disconnect the leather gaiter from the knob, hold the knob in your hands an…
Ford Focus (2004-2011 / MK 2, Focus 2) How to remove the damaged gear knob? Here’s how to remove it from above the operating shaft of the Ford Focus. Use a plastic lever to disconnect the …
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will see the steps to remove and replace the gear knob of the Ford Focus, following the instructions below. First, get inside the vehicle an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos