Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on a Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Rear bumper

In this tutorial, you will see how to remove the front bumper on a Ford Focus. First, open the bonnet. Then, undo all the fastening screws located on the top side and detach the front grille. Next, release the clips you just exposed, unscrew the remaining screws, and move to the wheel arch, where you will undo the two inner bolts. Once done, grasp the bumper at one end, pull it towards you, and unclip it from the chassis. After removing the number plate, proceed to fit the replacement by following the reverse procedure.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
How to Replace the Front Bumper on a Ford Focus
How to Replace the Front Bumper on a Ford Focus
Ford Focus (2011-2018 / MK 3) Today, we will go through the necessary instructions to remove and replace the front bumper on a Ford Focus, following these simple steps. First, ope…
Removing Front Bumper on Ford Focus
Removing Front Bumper on Ford Focus
Ford Focus (1998-2004 / MK 1) Do you want to remove the front bumper from a Ford Focus? Lift the front bonnet and let's see how to remove the front bumper. Remove the central gril…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos