Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mustang
    4. : How to replace the Ford Mustang Cobra key battery

Ford Mustang - Video tutorial

Model: Ford Mustang MK 6, S550 - Years 2015-2023
Part: Key
Operation: How to replace the Ford Mustang Cobra key battery

If the smart key on your new Ford Mustang Cobra suddenly stopped working don't worry as the problem could simply be caused by the dead battery. Below we will find out how to replace it safely and quickly. First you have to completely remove the emergency key by pulling it outwards. Then, using the same key, open the cover by making a slight push outwards, being careful not to create any damage. Once this is done, proceed with the replacement of the coin cell battery and, finally, replace the cover.


Posted on 4 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos