Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan of the Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Blower motor

To replace the cabin fan of the Ford Focus, open the glove compartment on the passenger side and remove the internal clips so that it can be fully lowered. Once the glove compartment is completely lowered, you will have access to the components at the back, including the fan. By loosening its fixing screws and disconnecting its connectors, the fan can be extracted from the bottom of the glove compartment and replaced with a new spare part. After installing the new fan, refit the glove compartment.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Fan on Ford Focus
Removing the Cabin Fan on Ford Focus
Ford Focus (2011-2018 / MK 3) Learn how to remove the cabin fan on a Ford Focus. The cabin ventilation fan is located directly under the dashboard. Unscrew the securing screws on …
Replacing the Cabin Fan Resistor on a Ford Focus
Replacing the Cabin Fan Resistor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger si…
How to Replace the Cabin Fan on a Ford Focus?
How to Replace the Cabin Fan on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the cabin fan on the Ford Focus, detach the panel on the right side of the dashboard next to the glove compartment on the passenger side. …

    Frequently Asked Questions

    • Focus 2011-2018 - Why is the fan of the Ford Focus not working? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos