Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Ford F-150

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Cabin air filter

If you need to replace the cabin air filter on this vehicle model, you can find the steps to follow in the description below. After accessing the cabin from the passenger side, open the glove compartment and unclip the side support pins to fully swing it down. Under the glove compartment, you will find a plastic panel that needs to be removed with a lever. Under this panel, there are screws that you must remove to extract another plastic panel. Beneath it, you will find the filter housing protected by a cover that you will remove by unclipping and pulling it towards you. Then, extract the filter and replace it with the new one, and proceed to reassemble all components in reverse order.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a 2008 Ford F150
How to Replace the Cabin Air Filter on a 2008 Ford F150
Ford F-150 (2004-2008 / MK 11) Follow the steps in this guide to easily replace the cabin air filter in your 2008 Ford F150. First, ensure the vehicle is parked on a level surface,…
How to Replace the Cabin Air Filter in a Ford F-150
How to Replace the Cabin Air Filter in a Ford F-150
Ford F-150 (2015-2020 / MK 13) This guide will show you how to remove and replace the cabin air filter in a Ford F-150 in simple and quick steps. First, get inside the vehicle on t…
How to Replace the Cabin Air Filter in a Ford F-150
How to Replace the Cabin Air Filter in a Ford F-150
Ford F-150 (2015-2020 / MK 13) To replace the cabin air filter in a Ford F-150, open the glove compartment and empty it completely. Locate the side mounting points and unclip them …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos