Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery of the Ford Transit Mk8 Remote Key

Model: Ford Transit MK 8 - Years 2014-2024
Part: Key

This video provides the main instructions for removing and replacing the battery of the remote key for the Ford Transit eighth series. First, take your remote and start by removing the back cover of the remote, using a small flat screwdriver to lever the sides; then remove and replace the battery with a new one, as shown in the video. At this point, insert the battery, the correct type (in this case a CR 2032 3V), in the correct orientation; all that’s left is to reattach the remote cover and test its functionality!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on a Ford Transit
How to Replace the Key Fob Battery on a Ford Transit
Ford Transit (2012-2024 / Custom) To replace the battery in the key fob of a Ford Transit, take the key fob and locate the unlock button on the back. Press the button and extract the …
How to Replace the Remote Battery on the Ford Transit Van?
How to Replace the Remote Battery on the Ford Transit Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, you will see how to replace the remote battery on the Ford Transit van, a very simple and cost-effective operation. Before proceedi…
How to Replace the Remote Battery in a Ford Transit Van?
How to Replace the Remote Battery in a Ford Transit Van?
Ford Transit (2014-2024 / MK 8) In this video, see how to replace the remote battery in a Ford Transit van. For this simple and quick operation, you need a replacement battery of ty…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos