Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Key of a Ford Focus

Model: Ford Focus MK 4 - Years 2018-2025
Part: Key

In this guide, you will see what actions to take to open the key of a Ford Focus. To start, you need to extract the remote from its casing: on either side of the keyring loop, you will see two buttons that you need to press; doing so will allow you to remove the plastic cover with the logo. Extract the key that you will find under the cover just removed. Under the keyring loop, you will now see a gap; using a screwdriver, you will need to pry, as shown at minute 1:15. Apply a gentle pressure, and you will be able to separate the two plastic parts, opening the remote.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Key Battery for Ford Focus and Mondeo
Replacing the Key Battery for Ford Focus and Mondeo
Ford Focus (1998-2004 / MK 1) In this video, you will see how to replace the battery in the remote key of a Ford Focus, as well as in the Mondeo and other models from the manufact…
Replacing the Key Fob Battery on a Ford Focus Mk2
Replacing the Key Fob Battery on a Ford Focus Mk2
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, see how to disassemble and replace the battery of the key fob on a second-generation Ford Focus by following these simple ins…
Replacing the Key Fob Battery for a Ford Focus
Replacing the Key Fob Battery for a Ford Focus
Ford Focus (2011-2018 / MK 3) Below are the steps to disassemble and replace the battery of the key fob for a Ford Focus. First, take your key fob and start by removing the rear c…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos