Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Ford Badge from the Grille of a 2000 Ford Fiesta

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002
Part: Grille

Learn how to remove the Ford badge from a 2000 Ford Fiesta to give it a more aggressive look. You need to take off the honeycomb grille from the front fascia, using a plastic spatula to avoid damage. It is pressed in place, and there may be plastic clips holding it at the bottom. Obtain another grille from a scrap yard; you can get it for just a few pounds. Cut a section that fits well for the central part where you will remove the Ford badge using wire cutters. With body filler, reconstruct the honeycomb pattern characteristic of the Ford grille. Smooth the edges carefully with sandpaper. Allow it to dry thoroughly for at least 24 to 36 hours. Spray paint with black paint: choose between gloss or matte, according to your preference, and refit the grille in its place. Now the vehicle has a more modern appearance.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front bumper grille of the Ford Fiesta
How to replace the front bumper grille of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this guide we will see the procedure that will allow us to disassemble and replace the front bumper grille of the Ford Fiesta, following these sim…
How to remove the front bumper grille on the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this tutorial we can see how to disassemble the front bumper grille in the Ford Fiesta MK5, an extremely simple and quick operation. First of all,…
Removing the Front Bumper Grille on Ford Fiesta
Removing the Front Bumper Grille on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Here's how to remove the grille from the front bumper of a Ford Fiesta: using a plastic lever or screwdriver, pry between the bumper plastic and the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos