Do it yourself
Frequently asked questions about cars and motorcycles

Intake Manifold Gasket Replacement

Model: Ford Focus MK 1 - Years 1998-2004
Part: Engine

Before applying the new gasket to the intake manifold, thoroughly clean the gasket seating area, removing any dirt and deposits that could compromise the adhesion and sealing of the gasket, affecting engine performance. Once cleaning is complete, place the new gasket aligning it with the dowel pins; then position the intake manifold and tighten the respective mounting bolts using a torque wrench and following a cross pattern. Do not neglect to clean the manifold itself.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) Before applying the new gasket to the exhaust manifold, it is essential to thoroughly clean the gasket seating on both the cylinder head and manifold…
Ford Focus (2004-2011 / MK 2, Focus 2) The intake manifold gaskets are actually o-ring seals applied inside specific grooves made at the ends of the intake manifold itself, which must then…
Ford Focus (2011-2018 / MK 3) To remove the intake manifold of the Ford Focus 1.6, first open the bonnet to remove the plastic cover from the top of the engine block. Once this is…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos