Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Battery

In the following video, you will see how to replace the battery in a Ford F-150. This operation is very simple but requires some tools that the video illustrates. For models from 2011-2015, remember that after changing the battery, you will need to reset the battery management system. To do this, you will need to use a special application that will allow you to restore the data. To remove the battery, the first thing to do is disconnect the connectors from the old battery using a wrench. First, remove the negative terminal and then the positive terminal. Next, remove the bolt that holds the battery in place and pull out the battery. Insert the new battery into the designated space, connect the positive terminal first and then the negative terminal, and secure the bolt. The battery has now been replaced.

Updated on 5 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Battery in a Ford F-150
How to Replace the Battery in a Ford F-150
Ford F-150 (2015-2020 / MK 13) To replace the battery in a Ford F-150, open the hood, as the battery is located in the engine compartment near the left headlight. Loosen the batter…
How to Replace the Key Battery for the 2012 Ford F-150
How to Replace the Key Battery for the 2012 Ford F-150
Ford F-150 (2009-2014 / MK 12) If your 2012 Ford F-150 key is not working anymore and you want to learn how to replace the battery inside, just follow the steps below. First, take …
Replacing the Battery in a Ford F-150
Replacing the Battery in a Ford F-150
Ford F-150 (2004-2008 / MK 11) In today's tutorial video, you will see how to remove and replace the battery in a Ford F-150 in simple and quick steps. First, open the hood and sta…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos