Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Alternator Fuse in the Ford KA+?

Model: Ford Ka MK 2 - Years 2008-2016
Part: Fuse box

If the alternator in your Ford KA+ has suddenly stopped working, the first thing to do is check the status of the corresponding fuse, which is shown in this video. It is labelled F1 and is located in the small red box on the positive terminal of the battery. Its amperage is 450A. If it is damaged, ensure you replace it with a spare of the same specifications, use the appropriate pliers provided, and always work with the vehicle turned off.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Alternator on a Ford Ka
How to Replace the Alternator on a Ford Ka
Ford Ka (1996-2008 / MK 1) Before you can start, open the front bonnet of your Ford Ka. Begin by loosening the tensioner of the auxiliary belt, then remove the belt itself that…
How to Remove the Alternator from a Ford Ka
How to Remove the Alternator from a Ford Ka
Ford Ka (1996-2008 / MK 1) Learn how to remove the alternator from a Ford Ka. Pull the lever located at the bottom left of the steering wheel and lift the bonnet (secure it). L…
What is the Fuse Diagram for the Ford KA?
What is the Fuse Diagram for the Ford KA?
Ford Ka (2016-2019 / MK 3) In this video, you can see the location of the fuse boxes of the Ford KA and their respective diagrams, to consult in case you need to check the fuse…

Other guides you may be interested in

    Frequently Asked Questions

    • Ka 2016-2019 - What is the location of the blower fuse on the Ford Ka? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos