Do it yourself
| ||||
|
Ford Kuga - Video tutorial
Model: Ford Kuga
MK 2, C520
- Years 2012-2019 If you need to reset the engine oil warning light on your Ford Kuga, but you don't know how to do it, all you have to do is follow this simple and short guide. First press the "Start" button and just turn on the ignition. Then keep both the brake pedal and the accelerator pedal depressed at the same time. At this point, a new message will appear on the on-board computer display informing you that the oil is being reset. As soon as the completion of the operation is confirmed, release both pedals and switch off the ignition. To confirm that the warning light has disappeared, you just have to turn the car on again.
Posted on 13 August 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |