Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of the Ford Escape 3

Model: Ford Escape MK 3 - Years 2013-2019
Part: Rear bumper

Today, you will see how to remove and replace the rear bumper of the third generation Ford Escape in this video tutorial. First, open the rear hatch and start by removing the taillights, unscrewing the screws and disconnecting the electrical connectors of the bulbs; then, unscrew the screws found on both sides of the wheel wells, releasing the bumper from the sides. At this point, use a socket wrench to unscrew the screws located under the bumper, as well as the upper ones; finally, completely remove the rear bumper from the body!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper on the Ford Escape?
How to Remove the Rear Bumper on the Ford Escape?
Ford Escape (2001-2007 / MK 1) To remove the rear bumper on the Ford Escape, open the rear hatch so you can unbolt the screws at the top of the bumper. Once these screws are remove…
Removing the Front Bumper on a Ford Escape
Removing the Front Bumper on a Ford Escape
Ford Escape (2013-2019 / MK 3) Briefly, we will see the instructions that will allow you to remove and replace the front bumper on a Ford Escape in simple steps. First, open the ho…
How to Remove the Front Bumper of a Ford Escape?
How to Remove the Front Bumper of a Ford Escape?
Ford Escape (2008-2012 / MK 2) To remove the front bumper of a Ford Escape, open the hood to access the bolts securing it from the top. Once these bolts are removed, you can unscre…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos