|
Do it yourself
| |||
| ||||
How to Install Side Steps on the Ford F150
Model: Ford F-150
MK 12
- Years 2009-2014
To install side steps on the Ford F150, it is recommended to use original Ford parts, which have the necessary certification. If you want to install them yourself, remember to check with your local motor vehicle department if they require inspection of the part. Not all motor vehicle departments inspect side steps, but if the steps are included in the registration booklet, it states that "the vehicle may be equipped from the factory with external body modifications." If this statement is not present, the steps must be inspected, with technical documentation attached to the steps, signed and stamped by the installer, and a proper installation letter signed by the installer. Therefore, if you install them yourself, remember that you will need to find someone willing to do you this (big) favor of signing the release letter for you. Keep in mind that uninspected side steps can cause significant problems in the event of a side collision with another vehicle, especially with insurance. So, check thoroughly with your local DMV, or have them inspected for added safety.
Updated on 9 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford F-150
(2009-2014 /
MK 12)
This guide shows how to remove the radio from a Ford F-150 Mk12. From the bottom of the radio console, disconnect the alarm LED and unscrew the 7 mm …
Ford F-150
(1992-1997 /
MK 9)
In this video we can see how to solve the problem of the odometer and speedometer not working on a Ford F150 MK9: of course we can check the speed se…
Ford F-150
(2004-2008 /
MK 11)
In this video we see how to program the remote control of the Ford F150 MK 11 version, more specifically a 2007 version: we must hold the remote cont…
Other guides you may be interested in
|
How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI
Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.930
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |