Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tire Pressure Light on a 2009 Ford F-150

Model: Ford F-150 MK 12 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Tire pressure warning light

See other generations:
Video tutorial

The procedure to reset the tire light on the 2009 Ford F-150 requires a special tool available at an automotive accessory retailer. Once you have obtained it, you can start the reset.

Press and release the accelerator pedal, then turn the ignition on three times in a row. On the third time, press the accelerator pedal, release it, and turn off the ignition. Repeat the on/off sequence again, and on the third time, without pressing the accelerator pedal, turn on the tire reset tool where you will select the make and model of the vehicle.

After that, bring it close to each wheel, pressing the tire sensor detection button. An audible alert will inform you that the value for that wheel has been recorded, and you can press OK and move to the next one. Once done for all four wheels, the light will be reset.


Posted on 25 May 2026 by ScegliAuto


Related tutorials

How to Replace the Tire Pressure Sensor on a Ford F-150
How to Replace the Tire Pressure Sensor on a Ford F-150
Ford F-150 (2015-2020 / MK 13) Below are the instructions to remove and replace the tire pressure sensor, allowing you to reset the TPMS light on your Ford F-150. First, lift the v…
How to reset the tire warning light on the Ford F-150?
How to reset the tire warning light on the Ford F-150?
Ford F-150 (2015-2020 / MK 13) In this tutorial, you can see how to reset the tire warning light on the Ford F-150, a very simple operation. This procedure should be done before re…
How to Reset the Tire Pressure Light on Ford 150
How to Reset the Tire Pressure Light on Ford 150
Ford F-150 (2015-2020 / MK 13) In this video tutorial, you can see how to reset the tire pressure light on a Ford 150 by following a few simple steps that will guide you step by st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos