Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Light on Ford 150

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Tire pressure warning light

In this video tutorial, you can see how to reset the tire pressure light on a Ford 150 by following a few simple steps that will guide you step by step towards proper vehicle management. First, go to a tire shop to restore the pressure in your tires, then wait until you resolve the issue that caused the tire deflation. Always refer to your vehicle's owner's manual. Next, turn on the ignition with the vehicle stationary, the engine off, and the parking brake engaged; check that the light is on, then turn off the ignition and turn it back on. Press the button for the four arrows six times until you hear the horn sound. Turn off and turn on the ignition again. Reset completed.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Ford F-150
How to Reset the TPMS Light on a Ford F-150
Ford F-150 (2009-2014 / MK 12) To reset the TPMS (Tire Pressure Monitoring System) light on a Ford F-150, turn on the instrument cluster without starting the engine. Ensure all tir…
How to Replace the Tire Pressure Sensor on a Ford F-150
How to Replace the Tire Pressure Sensor on a Ford F-150
Ford F-150 (2015-2020 / MK 13) Below are the instructions to remove and replace the tire pressure sensor, allowing you to reset the TPMS light on your Ford F-150. First, lift the v…
How to reset the oil light on the Ford F 150
How to reset the oil light on the Ford F 150
Ford F-150 (2021-2026 / MK 14) To complete the manual reset procedure of the oil light on your Ford F 150, you just need to follow a few simple steps. First, reach the driver's sea…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos