Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shift Cable in a Ford Fusion?

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Checks and maintenance

In this tutorial, you will see how to replace the shift cable in a Ford Fusion. For this, you will only need a flathead screwdriver and a 8mm wrench. First, open the hood and locate the end of the cable positioned right above the transmission. Then, unlock the indicated clip and pull it towards you. Next, move inside the cabin, disengage both the base of the boot and the trim of the center console, and remove the second end of the cable. At this point, you can pull it out of the housing, insert the replacement, and reassemble everything by following the reverse procedure.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Shift Cable on a Ford Fusion
How to Replace the Shift Cable on a Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) This guide provides the main instructions to remove and replace the shift cable on a Ford Fusion. First, open the hood and locate the transmission ca…
How to Unlock the Automatic Transmission in a Ford Fusion?
How to Unlock the Automatic Transmission in a Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will see how to unlock the automatic transmission in a Ford Fusion, an emergency operation to perform if the battery is dead an…
How to replace the gear shift knob in the Ford Fusion?
How to replace the gear shift knob in the Ford Fusion?
Ford Fusion North America (2006-2012 / MK 1) In this tutorial we can see how to replace the gear knob in the Ford Fusion, an extremely simple and fast operation. First of all, let's go inside th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos