Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Instrument cluster

To remove the instrument cluster from a Ford Focus, detach the plastic panels surrounding the instrument cluster to access the screws underneath. By removing these panels and unscrewing the screws, you can then slide the instrument cluster out of its housing, disconnecting the connectors located at the back of the instrument cluster. Once the cluster is free, replace it with a new part, ensuring it is properly connected to the relevant connectors and secured in its housing with the fixing bolts.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster from a Ford Focus?
How to Remove the Instrument Cluster from a Ford Focus?
Ford Focus (1998-2004 / MK 1) To replace the instrument cluster on a Ford Focus, you need to loosen the screws securing the plastic cover around the cluster: these screws are loca…
Replacing the Instrument Cluster in the Ford Focus
Replacing the Instrument Cluster in the Ford Focus
Ford Focus (2011-2018 / MK 3) To replace the instrument cluster in the Ford Focus, proceed as follows. Sit in the driver's seat; above the steering column, there is a plastic cove…
Removing the Instrument Cluster from a Ford Focus
Removing the Instrument Cluster from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Is the instrument cluster of your Ford Focus damaged? Let's see how to remove it from above the dashboard. Use a lever to remove the plastic trim of …

    Frequently Asked Questions

    • Focus 1998-2004 - Why does the Ford Focus instrument cluster no longer work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos