Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Rearview Mirror on a Ford Escape?

Model: Ford Escape MK 2 - Years 2008-2012
Part: Side mirror

To replace the exterior rearview mirror on a Ford Escape, first remove the door panel. To do this, unscrew the bolts that secure it. These are located inside the handle cavity, near the window switch, and at the bottom of the panel. By removing these screws and disconnecting the connectors inside, you can detach the panel to access the screws for the mirror. You can then unscrew them and remove the mirror from the outside, replacing it with a new one.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Outside Rearview Mirror on a Ford Escape
How to Replace the Outside Rearview Mirror on a Ford Escape
Ford Escape (2001-2007 / MK 1) Below, we will discover the steps to remove and replace the outside rearview mirror on a Ford Escape. First, open the front door of the vehicle and s…
How to replace the external rearview mirror on the Ford Escape?
How to replace the external rearview mirror on the Ford Escape?
Ford Escape (2013-2019 / MK 3) In this tutorial, we can see how to replace the external rearview mirror in the Ford Escape, an extremely simple and quick operation. First of all, w…
How to Remove the Rear Headlight on a Ford Escape?
How to Remove the Rear Headlight on a Ford Escape?
Ford Escape (2013-2019 / MK 3) In this video, you can see how to remove the rear headlight on a Ford Escape, a very simple and quick operation to perform if you need to replace a b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos