Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror on the Ford Escape?

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

In this tutorial, we can see how to replace the external rearview mirror in the Ford Escape, an extremely simple and quick operation. First of all, we open the door in which we will be working, then we remove the cap inside the handle, the window regulator console, and the side reflector.

We then unscrew all the bolts indicated with a 7mm socket wrench, separate the panel from the door, disconnect the regulator motor connector, and unscrew the three fixing bolts of the mirror with a Torx T30 key. To install the replacement, simply follow the reverse procedure.


Posted on 17 May 2025 by ScegliAuto


Related tutorials

How to Replace the Outside Rearview Mirror on a Ford Escape
How to Replace the Outside Rearview Mirror on a Ford Escape
Ford Escape (2001-2007 / MK 1) Below, we will discover the steps to remove and replace the outside rearview mirror on a Ford Escape. First, open the front door of the vehicle and s…
How to Replace the Exterior Rearview Mirror on a Ford Escape?
How to Replace the Exterior Rearview Mirror on a Ford Escape?
Ford Escape (2008-2012 / MK 2) To replace the exterior rearview mirror on a Ford Escape, first remove the door panel. To do this, unscrew the bolts that secure it. These are locate…
How to Replace the Rear Light Bulb in the Ford Escape
How to Replace the Rear Light Bulb in the Ford Escape
Ford Escape (2013-2019 / MK 3) To replace the rear light bulb in the Ford Escape, open the trunk lid to access the screws on the side of the light. By removing the cover caps and l…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos