Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Exhaust Manifold Gasket

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Engine

See other generations:
Video tutorial

Before applying the new gasket, it is essential to clean the gasket seating thoroughly, both on the manifold side and the cylinder head side, to remove any dirt and deposits that could compromise the gasket's adhesion and sealing; then insert the new gasket, aligning it with the dowel pins without applying gasket sealant, fit the exhaust manifold, the spacers, and tighten the fixing nuts in a cross pattern using a torque wrench.

After starting the engine, ensure there are no leaks.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing the Exhaust Manifold Gasket
Replacing the Exhaust Manifold Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Thoroughly clean the gasket seating, removing any dirt and deposits from both the cylinder head and the manifold; then apply the new gasket, aligning…
Replacing the Exhaust Manifold Gasket
Replacing the Exhaust Manifold Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) A very important step before applying the new gasket is to clean its seating: you must clean both the cylinder head side and the manifold side to rem…
Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before applying the new gasket to the intake manifold, thoroughly clean the gasket seating on both the cylinder head and manifold sides: remove any d…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos