Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cylinder Head Fixing Studs

Model: Ford Escort MK 4 - Years 1990-2000
Part: Engine

When performing maintenance that requires the removal of the cylinder head, it is good practice to use a new set of studs for reattachment. Start by cleaning the fixing holes on the cylinder block with a tap of the correct diameter and pitch, ensuring no debris falls into the cylinders. Then, position the new cylinder head gasket and the cylinder head itself, apply copper grease to the base of the threads and under the heads of the new studs, and proceed with tightening using a cross pattern, first with a torque wrench and then with a standard spanner.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cylinder Head Gasket Replacement
Cylinder Head Gasket Replacement
Ford Escort (1990-2000 / MK 4) After machining the cylinder head, check for any deformations and the perfect flatness of the surface using a straight edge and a feeler gauge; repea…
Replacement of Front Discs and Pads
Replacement of Front Discs and Pads
Ford Escort (1990-2000 / MK 4) Lift the vehicle on suitable axle stands and remove the front wheel. Disconnect the retaining spring and then remove the retaining pins of the brake …
Replacing the Rocker Cover Gasket
Replacing the Rocker Cover Gasket
Ford Escort (1990-2000 / MK 4) The failure of the rocker cover gasket (the cover of the camshaft that operates the valves) is a common fault in older cars, leading to oil leaks tha…

How to Remove the Oil Filter on a Toyota Yaris

How to remove the oil filter on a Toyota Yaris? This is a simple operation if you follow the correct steps. Lift the car using a column lift or jack. After removing the cover panel (if present), use a socket spanner to unscrew the oil filter holder. Allow the oil to drain into a container for disposal. Remove the dirty and worn filter from the metal container; clean the container and insert a new filter. Screw the filter holder back into its designated housing using the appropriate spanner and lower the car once the job is complete.

Watch the video!


by ScegliAuto

More videos