Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on Ford F-250 [USA]

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Diesel fuel filter

The fuel filter is located under the front left floor, just after the front left suspension assembly. Once located, use a screwdriver to remove the clips connecting the fuel inlet and outlet lines. Clean the mounting areas of the lines to be removed with a wire brush, and using a lubricant, loosen the nuts on both sides and wait for any residual fuel to drain out. Pull the filter out of its housing and install the new filter compatible with the vehicle type. Reinsert the nuts and clips and tighten everything back up.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Fuel Filter on a Ford F-250 6.4 Diesel
Replace the Fuel Filter on a Ford F-250 6.4 Diesel
Ford F-250 (2011-2016 / P473) This guide shows how to remove and replace the fuel filter on a Ford F-250 6.4 Diesel in simple and quick steps. First, lift the vehicle and drain th…
Replacing the Fuel Filter on the Ford F-250 6.7L
Replacing the Fuel Filter on the Ford F-250 6.7L
Ford F-250 (2011-2016 / P473) In this short guide, you will see how to remove and replace the fuel filter on the Ford F-250 with a 6.7-liter engine. First, lift the vehicle and di…
How to Replace the Engine Air Filter on Ford F-250 [USA]
How to Replace the Engine Air Filter on Ford F-250 [USA]
Ford F-250 (2011-2016 / P473) To replace the engine air filter, open the hood and locate the cover that contains the filter on the upper right side of the engine compartment. To o…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos