Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Fuel Filter Light on the Ford F-250

Model: Ford F-250 P473 - Years 2011-2016
Part: Warning light – error code

Inside the fuel filter, there is a small sensor that automatically detects the wear level of the component. This allows every driver to replace it promptly and avoid causing further damage to the engine. Sometimes, this sensor may provide incorrect data, causing the corresponding light to appear on the display. To reset it, insert the key and turn on the ignition. Then, enter the menu and go to "settings". Scroll down until you find "vehicle" and then select "maintenance". Finally, select "fuel filter" and hold the "ok" button for a few seconds. The reset is complete, and you can exit the menu.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Filter on the Ford F-250 6.7L
Replacing the Fuel Filter on the Ford F-250 6.7L
Ford F-250 (2011-2016 / P473) In this short guide, you will see how to remove and replace the fuel filter on the Ford F-250 with a 6.7-liter engine. First, lift the vehicle and di…
Replace the Fuel Filter on a Ford F-250 6.4 Diesel
Replace the Fuel Filter on a Ford F-250 6.4 Diesel
Ford F-250 (2011-2016 / P473) This guide shows how to remove and replace the fuel filter on a Ford F-250 6.4 Diesel in simple and quick steps. First, lift the vehicle and drain th…
Replacing the Fuel Filter on Ford F-250 [USA]
Replacing the Fuel Filter on Ford F-250 [USA]
Ford F-250 (1999-2007 / Phn131) The fuel filter is located under the front left floor, just after the front left suspension assembly. Once located, use a screwdriver to remove the c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos