Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on the Ford F-250 6.7L

Model: Ford F-250 P473 - Years 2011-2016
Part: Diesel fuel filter

In this short guide, you will see how to remove and replace the fuel filter on the Ford F-250 with a 6.7-liter engine. First, lift the vehicle and disconnect the electrical connector from the fuel filter; then, disconnect the hose to drain excess fuel into a container, as shown in the video. At this point, use a socket wrench to unscrew and completely remove the filter, replacing the cartridge with a new one; now you can reinstall the fuel filter by applying the reverse procedure of disassembly!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Filter on Ford F-250 [USA]
Replacing the Fuel Filter on Ford F-250 [USA]
Ford F-250 (1999-2007 / Phn131) The fuel filter is located under the front left floor, just after the front left suspension assembly. Once located, use a screwdriver to remove the c…
How to Replace the Cabin Air Filter on a Ford F-250?
How to Replace the Cabin Air Filter on a Ford F-250?
Ford F-250 (2017-2022 / P558) To replace the cabin air filter on a Ford F-250, open the glove compartment on the passenger side and lower the side flaps to remove the entire glove…
How to Reset the Fuel Filter Light on the Ford F-250
How to Reset the Fuel Filter Light on the Ford F-250
Ford F-250 (2011-2016 / P473) Inside the fuel filter, there is a small sensor that automatically detects the wear level of the component. This allows every driver to replace it pr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos