Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Turbo Lubrication Pipe

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Engine

Lubrication of the turbo is absolutely essential to keep it efficient, as these are mechanical components that rotate at extremely high speeds and are also subjected to considerable thermal stress: ensuring proper lubrication is therefore extremely important. The pipe that carries oil from the sump to the turbo is shaped in such a way as not to interfere with other engine components and has two eyelets at both ends that allow the passage of oil, thanks also to the special hollow fixing pin: it is important to also insert the copper washer and tighten the pin to the correct torque.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) On this car model, disassembling the turbocharger is quite straightforward as it is located at the front of the engine; ensure the engine is cold bef…
Ford Focus (2011-2018 / MK 3) Removing a turbocharger may seem complex, but if you have some experience, it is achievable even for a DIY enthusiast. Start by removing the engine c…
Ford Focus (2004-2011 / MK 2, Focus 2) Turbo failure is a fairly common fault, especially after a certain mileage. If you need to install a new turbo (it is also advisable to choose a refu…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos