Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in the Ford C-MAX?

Model: Ford C Max MK 2 - Years 2010-2019
Part: Service warning light

Resetting the service light in the Ford C-MAX is an extremely simple and quick operation; let’s see how to proceed in this tutorial. Before proceeding, ensure that all required scheduled maintenance work has been completed. Start by entering the cabin, then turn on the instrument panel and press down both the brake and accelerator pedals fully. Keep both pedals in position for about 20 seconds, or until the display shows the reset message. To verify that the operation was successful, you can restart the vehicle.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford C-MAX?
How to Reset the Service Light on a Ford C-MAX?
Ford C Max (2010-2019 / MK 2) In this tutorial, you will see how to reset the service light on a Ford C-MAX, a very simple and quick operation to be performed only after completin…
How to Reset the Tyre Pressure Warning Light on the Ford C-Max
How to Reset the Tyre Pressure Warning Light on the Ford C-Max
Ford C Max (2010-2019 / MK 2) You can completely reset the tyre pressure warning light on the Ford C-Max instrument cluster by inflating the car's tyres to the optimal pressure va…
How to Reset the Service Light in the Ford C-MAX?
How to Reset the Service Light in the Ford C-MAX?
Ford C Max (2010-2019 / MK 2) .. In this tutorial, you will see how to reset the service light in the Ford C-MAX, a very simple and quick operation to perform only after.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos